Fiber Washer
#10-24x1/2" Screw
9
Tank Retainer
Insert tank retainer into bracket and secure with wing screw.
Burner, Firebox and Control Knobs
Place burner assembly into firebox (A). Fasten the burner assembly to the firebox using 5mm ID, 15mm OD fiber
washers and #10-24x1/2" screws.
Place firebox onto upper firebox supports. Make sure burner tubes are correctly engaged (B). If burner is not
leveled from left to right, adjust the two screws attaching valve to control panel. Attach short ignitor wire to
ignitor (B).
Attach firebox with #10-24x1/2" screws, 5mm ID, 15mm OD fiber washers and #10-24 flange nuts (C).
Push control knobs onto valve stems (C).
10
Tank
Retainer
#10-24x3/8"
Wing Screw
Qty: 1
A
B
C
Valv
e
Burn r Tube
e
Short
Ignitor
Wire
Control
Knob
Firebox
Burner Assembly
#10-24 Flange Nut
Qty: 4
5mm ID, 15mm OD
Fiber Washer
Qty: 6
18 • 463822107
#10-24x1/2"
Screw
Qty: 6
