background image

3  

WARNING

CALIFORNIA PROPOSITION 65

1. Combustion by-products produced when using 

this product contain chemicals known to the State of 

California to cause cancer, birth defects, and other 

reproductive harm.

2. This product contains chemicals, including lead 

and lead compounds, known to the State of 

California to cause cancer, birth defects or other 

reproductive harm. 

Wash your hands after handling this product.

Installation Safety Precautions

Use grill, as purchased, only with LP (propane) gas and the 
regulator/valve assembly supplied. A conversion kit must be 
purchased for use with natural gas.

Grill installation must conform with local codes, or in their 
absence of local codes, with either the 

National Fuel Gas 

Code, ANSI Z223.1/ NFPA 54, Natural Gas and Propane 
Installation Code, CSA B149.1, or Propane Storage and 
Handling Code, B149.2, or the Standard for Recreational 
Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, 
Recreational Vehicle Code, as applicable. 

• All electrical accessories (such as rotisserie) must be 

electrically grounded in accordance with local codes, or

 

National Electrical Code, ANSI / NFPA 70 or Canadian 
Electrical Code, CSA C22.1.

  Keep any electrical cords and/or 

fuel supply hoses away from any hot surfaces.

• This grill is safety certified for use in the United States and/or 

Canada only. Do not modify for use in any other location. 
Modification will result in a safety hazard.

WARNING

Do not attempt to repair or alter the 

hose/valve/regulator for any “assumed” defect. Any 

modification to this assembly will void your warranty 

and create the risk of a gas leak and fire. Use only 

authorized replacement parts supplied by 

manufacturer.

Summary of Contents for 463741209

































Reviews: