13
Heat T
ent
Front of Firebox
14
•
Insert temperature gauge stem into the bigger hole as shown
A
.
Make sure the gauge is pushed in as far as it will go, then push
the gauge downward until it clips into the panel, shown
B/C
.
Back of Firebox
Heat T
ent
•
Place heat tents over burners
by inserting tabs into slots in front of firebox. Note: Notch on the end of heat tents should fit over
protrusions on the rear wall of firebox.
25
Temperature
gauge stem
A
C
B
Back of
control
panel
