5
6
1/4-20x1 ½" screw
Upper back panel
On back of grill, place upper back panel between side panels. Secure upper back panel in lower holes, using one
1/4-20x1½”
screw on each side.
Do not fully tighten screws until side shelf installation is complete in later
steps.
Knob
Temperature gauge
Temperature gauge stem
Control panel
A
C
B
Back of the panel
Insert temperature gauge stem into the bigger hole above knob, shown
A
. Make sure the gauge is pushed in as
far as it will go, then push the gauge downward until it clips into the panel, as shown in
B/C
.
15
