Char-Broil 463265109, Product Manual

Page: 21 / 32

9
First, remove the two screws and lock washers factory attached to the sideburner valve bracket.
Position sideburner
valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes
on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
fascia, making sure “
OFF
” is on the top. Attach using two
#8-32x3/8”
screws and
4mm
lock washers. Press sideburner
control knob onto valve stem.
Screws and Washers
removed from valve bracket
Note: Use upper and lower
holes on fascia to
attach bezel
Sideburner
valve bracket
Valve stem
Screw
Lock washer
Control knob bezel
#8-32x3/8” screw
#8-32x3/8” screw
Qty.2
Qty.2
4mm
4mm lock washer
lock washer
Valve stem
Sideburner
shelf fascia
8
A
On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel, in
lower holes, using one
1/4-20x1½” 1/4-20x1½”
screw and 7mm lock washer on each side. In upper holes, using one
screw and
7mm
lock washer on each side, shown
A
. In the cart, secure upper back panel to lower back panel using
one
1/4-20x1/2”
screw and
7mm
lock washer, shown
B
.
1/4-20x1½”
1/4-20x1½”
7mm
7mm
lock washer
lock washer
Lower back panel
Upper back panel
screw
screw
1/4-20x1/2”
screw
7mm
lock washer
B
Upper back panel
1/4-20x1½”
7mm Lock washer
screw
Qty.4
Qty.5
1/4-20x1/2”
Qty.1
Screw
Sideburner control knob
21
OFF