background image

BEFORE BEGINNING ASSEMBLY,

 check that the quantities of

the parts received match those on the parts list.

SERVICE POLICY:

Please contact Whittier Wood Products customer service department directly for

replacement parts.

We will replace any parts which are defective, missing or damaged during assembly.

If you live in the U.S. or Canada, you can reach us toll free at: 

800-653-3336

.

All other customers can reach us by calling 

541-687-0213

, faxing 

541-687-2060

or writing to P.O. Box 2827, Eugene, OR-USA 97402.

Customer service personnel can be reached Monday-Friday, 7:00 A.M. to 5:00 P.M. Pacific time.

A message can be left for customer service 24 hours a day, seven days a week.

When contacting us, please provide the furniture model number, part letter,

quantity needed, reason for replacement and your full name and address

along with a telephone number in case we need to contact you.

Your parts will be sent from our Eugene,Oregon factory within two working days from the time

we receive the request. Please allow 5-10 days for delivery.

Chaparral Furniture is presented by:

WHITTIER WOOD PRODUCTS • P.O. BOX 2827 • EUGENE, OREGON 97402 • (541) 687-0213

INSPECT YOUR FURNITURE PERIODICALLY FOR ANY LOOSE GLUE JOINTS OR SCREWS, OR ANY OTHER
PROBLEM WHICH MAY BE AFFECTING THE STABILITY OF YOUR FURNITURE. TIGHTEN OR REPAIR AS NEEDED.

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

  4/04

926W

Hobby

Cart

FOR NORMAL HOUSEHOLD USE ONLY.

NOT

 

RECOMMENDED FOR

COMMERCIAL USE.

Presented by Whittier Wood Products

TOOLS REQUIRED: Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue

Do not climb, sit, or

stand on this piece of

furniture.
Do not overload drawers

on this unit.
Before loading this unit,

check all screws and

supports for tightness.

Summary of Contents for 926W

















Reviews: