Channel Vision P-0920 Instructions Manual Download Page 12

Channel  Vision  Technology  will  repair  or  replace  any  defect  in 

material  or  workmanship  which  occurs  during  normal  use  of  this 

product with new or rebuilt parts, free of charge in the USA, for two 

years from the date of original purchase. This is a no hassle warranty 

with no mail in warranty card needed. This warranty does not cover 

damages in shipment, failures caused by other products not supplied 

by Channel Vision Technology, or failures due to accident, misuse, 

abuse, or alteration of the equipment. This warranty is extended only 

to the original purchaser, and a purchase receipt, invoice, or other   

proof  of  original  purchase  date  will  be  required  before  warranty 

repairs are provided.

Mail in service can be obtained during the warranty period by calling 

(800) 840-0288 toll free. A Return Authorization number must be   

obtained in advance and can be marked on the outside of the shipping 

carton.

This warranty gives you specific legal rights and you may have other 

rights (which vary from state to state). If a problem with this product 

develops during or after the warranty period, please contact Channel 

Vision  Technology,  your  dealer  or  any  factory-authorized  service 

center.

500-142 revD2

Summary of Contents for P-0920













Reviews: