DVR USER MANUAL - Issue 3 - 12/2013
| 5
CHANNEL SAFETY SYSTEMS
t: 0845 884 7000 | w: www.channelsafety.co.uk
SAFETY INSTRUCTIONS
Please read all the safety instructions and user manual before the equipment is operated.
1.
Power sources
This equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power, please consult your supplier.
2.
Objects and Liquid
Never push objects of any kind through openings of this equipment and / or spill liquid of any kind on the equipment as they
may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
3.
Heat sources
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers that
produce heat.
4.
Environment
Be careful to ensure your DVR is not installed in a dusty environment or near any magnetic fields.
5.
Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for
cleaning.
6.
Extreme weather conditions
Unplug this equipment during lightning storms or when unused for long periods of time.
7.
Transportation of equipment
Do not place this equipment on unstable trolleys, stands, or tables. When a trolley is used, use caution when moving the trolley /
apparatus combination to avoid injury from tip-over. Disconnect the power before moving the equipment. And the equipment
should be moved with care.
8.
Attachment
Never add any attachments and/or equipment without the approval of the manufacturer, as such additions may result in the
risk of fire, electric shock and other personal injury.
9.
Correct Batteries
Risk of explosion occurs if battery is replaced by an incorrect type. Therefore you must use the same type of battery as the one
being used in the product.
10.
Ventilation.
Do not block any ventilation openings, installation of the equipment in the rack should be such that the amount of airflow
required for safe operation of the equipment is not compromised.
11.
Overloading
Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.
12.
Reliable Earth connections (Grounding)
Reliable grounding of rack mounted equipment should be maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit.
