DVR USER MANUAL - Issue 3 - 12/2013
| 36
CHANNEL SAFETY SYSTEMS
t: 0845 884 7000 | w: www.channelsafety.co.uk
5.3.25 PTZ Set
Click [Main Menu - Device - PTZ] to enter into the below window shown as Picture 5-47
Picture 5-47
You can select the channel you desire to control and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800, 9600), Data bit
(8, 7, 6, 5), Stop bit (1, 2), Parity Check (None, Odd, Even, Mark, Space), Address Code and Cruise status respectively.
Please Note:
the PTZ
device can be activated only when a channel in connection with the PTZ camera is selected.
5.3.26 Serial Set
Enter into the [Main Menu - Device - Serial] Menu shown in Picture 5-48
To operate the DVR via a keyboard, it is required to set the communication
protocol.
Baud rate:
Set baud rate of serial communication.
Data bit:
Set data bit of serial communication.
Stop bit:
Set stop bit.
Parity Check:
Set parity check to <None> or other.
Picture 5-48
