DVR USER MANUAL - Issue 3 - 12/2013
| 21
CHANNEL SAFETY SYSTEMS
t: 0845 884 7000 | w: www.channelsafety.co.uk
5.3.4 Record set: Record Parameters
5.3.5 Schedule
Go to [Main Menu - Record - Record Para] to enter into the interface shown as Picture 5-14.
Channel:
Allows you to setup the channel you desire.
Record:
Allows you to setup the record status
(Enable/Disable) of each channel
Pack Duration:
Indicates maximum continuous record
time (15, 30, 45 and 60 min).
Pre-record:
Motion detection and I/O triggered record sup-
port Pre-record function.
Click [Main Menu - Record - Schedule] to enter into the interface shown as Picture 5-15.
[Channel] option allows you to select the channel you desire.
To setup weekly schedules, tick-select the box of the record status
you want (Alarm, General, or No Record) and then click on each box
in the schedule time line that you want this method applied to. You
can use the [Copy – To] pull-down menus and Copy button to copy
settings from one day to another day or all days.
Picture 5-14
Picture 5-15
After you complete the schedule you can activate it by clicking the
[Apply] button.
You can also click on the Default button to use the system defaults.
Explanation:
Under the <record> menu and <search> menu,
The original color stands for no record
“Red” stands for alarm record
“Yellow” stands for Motion record
“Green” stands for normal record
