6
GROUNDING
TYPICAL ELECTRICAL GROUNDING FOR ANTENNA GROUND POLE
NOTE: All installations to conform to latest issue of National Electrical Code.
Ground antenna mount assembly and feed cables in accordance with current National Electrical code and local codes.
Figures 2.0 and 2.1 illustrates typical grounding methods for the ground pole and feed cables.
Clamps that provide a solid connection between ground wire and ground source should be used.
Tighten and torque all hardware.
GROUND WIRE
(Typical #10 AWG Copper, #8 Aluminum)
Refer to NEC Section 810 and local electric
codes for the specific area requirements.
¹⁄₄
" - 20 UNC x
⁵⁄₈
"
HEX HEAD, TYPE "D" POINT,
SELF TAPPING SCREW
GROUND LUG
¹⁄₄
" EXTERNAL TOOTH
LOCK WASHER
Drill hole through one wall with
⁷⁄₃₂
" Dia. twist drill.
Apply sealant here, after
assembly, to improve
corrosion resistance.
GROUND POLE
REF
10"-12"
NOTE:
ALL INSTALLATIONS TO
CONFORM TO THE LATEST
ISSUE OF THE NATIONAL
ELECTRIC CODE AND
LOCAL CODES.
FIGURE - 2.0
FIGURE - 2.1
