2
Sensor Setup
Set the A-B-C Switch
The A-B-C switch is located inside the
battery compartment. Slide to set the
channel to A, B or C.
NOTE:
If being used with a companion
product that has an A-B-C channel,
you must select the same letter choice
for both the sensor and the product it is
being paired with in order for the units to
synchronize.
Install or Replace Batteries
AcuRite recommends high quality alkaline
or lithium batteries in the wireless sensor
for the best product performance. Heavy
duty or rechargeable batteries are not
recommended.
The sensor requires lithium batteries in low
temperature conditions. Cold temperatures
can cause alkaline batteries to function
improperly. Use lithium batteries in the
sensor for temperatures below -4ºF /
-20ºC.
1. Slide off the battery compartment cover.
2. Insert 4 x AA batteries into the battery
compartment, as shown. Follow the
polarity (+/-) diagram in the battery
compartment.
3. Replace the battery cover.
SETUP
2
Install Batteries
4 AA batteries
1
A-B-C Switch
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an
extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only
batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit
the supply terminals.
1
2
A B C
Summary of Contents for AcuRite 06045
Page 7: ...7...
