4
False Detection
This sensor features advanced technology to distinguish between lightning strikes and
interference, however in rare cases the sensor may "false detect" lightning activity due to
interference. In these situations, verify there is no lightning in the area and then relocate
the sensor. If the false detections persist, identify and relocate the source of interference or
relocate the sensor.
Interference
The sensor features enhanced interference rejection capabilities to prevent false lightning
detection. When the sensor cannot detect lightning due to interference from nearby
equipment, the sensor's interference indicator will flash.
• Electric motors (windshield wiper motor or fan motors in cars, hard drive and
optical drive motors on your PC and AV equipment, well pumps, sump pumps)
• CRT monitors (PC monitors, TV's)
• Fluorescent light fixtures (turned off or on)
• Microwave ovens (while in use)
• PC's and mobile phones
WARNING:
Take shelter IMMEDIATELY when lightning is present, whether or not it has
been detected by the Lightning Detection Sensor. If you are concerned about lightning
strikes, follow all safety precautions to keep yourself and others safe. DO NOT rely on
this Lightning Detection Sensor as your only source for warnings about potentially deadly
lightning strikes or other severe weather conditions.
Problem
Possible Solution
Interference
Indicator is flashing
• Relocate the sensor.
• Make sure the sensor is placed at least 3 feet (.9 m)
away from electronics that may cause interference (see
Interference section above).
Troubleshooting
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.acurite.com/support.
Summary of Contents for AcuRite 06045
Page 7: ...7...
