©
Copyright 2005 Hubbell Power Systems
P403-3408
rev A
Operating Instructions
for
Auto-Ranging Voltage Indicator
The equipment covered in this manual must be used and serviced only by competent,
trained personnel familiar with and following approved work and safety practices.
This equipment is for use by such personnel and this manual is not intended as a
substitute for adequate training and experience in safe procedures for this type of
equipment.
These instructions neither cover all details or situations in equipment use, nor do
they provide for every possible contingency to be encountered in relation to
installation, operation or maintenance. Should additional information and details be
desired or if situations arise which are not covered adequately for the user’s purpose,
the specifics should be referred to Hubbell Power Systems, Chance
®
.
Before operating a CHANCE
®
Auto-Ranging Voltage Indicator, thoroughly read,
understand, and follow these instructions. Keep these instructions in the device
case for future reference.
NOTICE
Catalog No.
C403-3374
Voltage
600V - 69kV
®
Do not allow universal fitting to touch any part of URD cabinet, to become grounded
in any other way, or to contact another phase as this will cause erroneous voltage
indication and could cause severe personal injury or damage to equipment.
Catalog No.
C403-3375
Voltage
69kV - 500kV
!
CAUTION
!
WARNING
Sold by:
http://www.TWAcomm.com
Toll Free: (877)
389
-
0000
