3
www.championcuttingtool.com
WARNING: Cancer & reproductive harm - See P65Warnings.ca.gov for more info.
WARNING! Read and understand all instruction before operating any drilling system.
Failure to
follow all instructions listed below may result in electrical shock, damage to drilling system and even
personal injury.
GENERAL SAFETY INSTRUCTIONS
Work area
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids,
gases or extreme dust.
Power tools create sparks that may ignite gases as well as flammable
liquids.
3. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose
control.
Electrical Safety
1. Grounded tools must be plugged into an outlet properly installed and grounded in accordance
with all codes and ordinances. Never remove the ground prong or modify the plug in any way. Do
not use any adaptor plugs. Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded.
If tools should electrically malfunction or break down, grounding provides
a low resistance path to carry electricity away from the user.
2. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
3. Don’t expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
of electric shock.
When operating a power tool outside, use an outdoor extension cord marked .
W-A. or. W.
These cords are rated for outdoor use and reduce the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use tool while tired or under the influence of drugs, alcohol, or medication.
A moment of
inattention while operating power tools may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving
parts.
3. Avoid accidental starting. Be sure switch is off before plugging in.
Carrying tools with your finger on
the switch or plugging in tools that have the switch on invites accidents.
4. Remove adjusting keys or switches before turning the tool on.
A wrench or a key that is left attached
