EN
2
5.
Set the required suction power by the electronic suction regulator. The suction power can
also be adjusted with the sliding control on the angled pipe.
NOTE
:
Pay attention to unusual noises when using the device. This could indicate a
malfunction or a blocked suction.
Parts
1. Handle
2.
Air flow manual adjustment device
3.
Telescopic suction pipe
3A
Telescopic pipe adjustment button
3B
Adjustable telescopic pipe
4
Combination carpet/floor brush
4A
Brush position toggle switch
5
Flexible suction pipe
6
Flexible suction pipe locking buttons
7
Electronic power regulator
8
ON/Off switch
9
Dust collection system release button
10
Carry handle
11
Suction inlet
12
Coupling for vertical parking position
13
Technical data
14
Power cable
15
Automatic cable winding button
16
Dust collection system
16A Upper cover
16B Upper cover opening/locking button
16C Safety interlock
16D HEPA premotor filter
16E Dust container
17
Coupling for horizontal parking position
18
Outlet filter
19
Discharge filter grid
20
Release/locking button of the outlet filter grid
21A Crevice tool
Accessories
Combination carpet/floor brush (4):
Adjust the combination brush according to the type of
flooring, using the brush position toggle switch (4A).
Brush position toggle switch (4A) set to symbol
for hard flooring. Brush position toggle switch
(4A) set to symbol for rugs and carpeting.
Crevice tool (21A):
To clean corners and crevices, such as radiators,
skirting, boards, blinds and awnings.
