(5)
OM000PI PI Manual REV 5 080119
POWER REQUIREMENTS
Electrical Requirements:
AC Power Supply: 120 VAC, 60 Hertz
Rated Current Input:
Max. 3.7 Amps
Power Output:
12VDC (Heat/Massage) 24VDC (Power recline)
Ambient Temperature:
+41˚ to +104˚F (+5˚to +40˚C)
Duty Cycle (Power recline)
10%, Max. 2 min./18min.
IEC Protection Class:
Class II (Heat/Massage) Class I (Power Recline)
Battery Duration (approx. times):
Backup battery system to remain plugged in. Approx.
15 recline cycles of the chair from battery.
Battery Recharge Time:
4 Hours, Storage 10 Hours every 6 months
Running battery to low power will cause damage.
Battery Specifications:
If the battery needs to be replaced part number BA1802-0200-000 must be used. Champion’s
Customer Service must be contacted at 800-998-5018 to obtain a replacement part. Follow local
governing ordinances and recycling plans regarding disposal of battery. DO NOT dispose of the
battery packs in household waste.
Battery Type:
Lead Acid
Rated Capacity:
1.2Ah, 24V
Charging Current:
Max 0.3A
WARNING: Do NOT open the case of the battery. Doing so may be hazardous. Do
NOT use any other battery than listed above.
Double-Insulated Products
(Heat/Massage power supply)
In a double-insulated product, two systems of insulation are provided instead of grounding. No
means of grounding is provided on a double-insulated product, nor is a means for grounding to be
added to the product. Servicing a double-insulated product requires extreme care and knowledge
of the system, and is to be done only by qualified service personnel. Replacement parts for
double-insulated product must be identical to the parts they replace. A double-insulated product is
marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED”. The symbol ( ) is
also able to be used to identify a double insulated product.
