(24)
OM000PI PI Manual REV 5 080119
POWER CONNECTIONS
Remove Cables:
1.
Remove the cable lock. This may require a small screwdriver to undo the clips on the
control box.
2.
Pull the desired cable out of the control box. The power cable has a clip that may require a
screwdriver to release.
Install Cables:
1.
Insert each cable into the port shown above. Some of the connectors have a guide pin for
alignment.
2.
Install the cable lock over the cables and make sure all three clips have locked in place.
This prevents the cables from being pulled out accidentally.
(2 extra fuses
in here.)
Power Cable
Battery Cable
Handset Cable
Actuator Cable
Control Box
Cable Lock
Clips
Guide Pin Slot
Fuse Port