Storage
16
Rev
92201-20090714
Storage
Log Splitter Storage
Refer to the Maintenance section for proper
cleaning instructions.
Log Splitter Storage.
1.
The log splitter needs to be cool for at
least 5 minutes before storing.
2.
Clean the log splitter before storage
according to the Maintenance section.
3.
Retract the wedge to protect the rod
from corrosion.
4.
Wipe the beam and wedge with an oily
rag to prevent rust and corrosion.
Engine stored for less than 30 days.
1.
Allow the engine to cool completely
before storage.
2.
Clean engine according to the
Maintenance section.
3.
To extend the fuel storage life add fuel
stabilizer.
4.
Turn the fuel valve to the off position.
Engines stored for over 30 days.
1.
The engine needs to cool completely
before storage.
2.
Clean engine according to the
Maintenance section.
3.
Drain all fuel completely from the fuel
line and carburetor to prevent gum from
forming.
4.
Add a fuel stabilizer into the fuel tank.
5.
Change the oil.
6.
The fuel valve needs to be in the off
position.
7.
Remove the spark plug and pour about
½ ounce of oil into the cylinder. Crank
the engine slowly to distribute the oil
and lubricate the cylinder.
8.
Reattach the spark plug.
WARNING
Never store the log splitter inside next to
appliances where there is a source of heat or
open flame, spark or pilot light because they can
ignite gasoline vapors.
DO NOT store a log splitter near fertilizer or any
corrosive material.
Even with an empty gas tank, gasoline vapors
could ignite.
Summary of Contents for 22 TON LOG SPLITTER
