![background image](http://html.mh-extra.com/html/champion/100892/100892_operators-manual_2588682013.webp)
100892 - 4500W OPEN FRAME INvERTER
CONTROLS AND FEATURES
13
Control Panel
1.
Economy Mode Switch
– Enables/disables automatic idle
control.
2.
Low Oil Warning Indicator Light
– When ON, engine will
shut down and not run. Check oil level.
3.
AC Overload Reset Button
– Used to re-energize
receptacles after overload fault.
4.
Engine Switch
– Used to put in START mode or STOP the
generator.
5.
Intelligauge
– Three mode digital meter for displaying total
run time, voltage and hertz.
6.
Choke
– Used to start a cold engine.
7.
Parallel Outlets
– Used to parallel two inverters together for
increased power output. (parallel kit sold separately).
8.
Circuit Breakers (Push Reset)
– Protects the generator
against electrical overloads.
9.
Ground Terminal
– Consult an electrician for local grounding
regulations.
RECEPTACLES
A
z
12V DC, 8A (Automotive)
May be used to supply electrical power for
operation of 12 Volt DC, 8 Amp electrical loads.
B
t
120V AC, 30A RV (NEMA TT-30R)
May be used to supply electrical power for
operation of 120 Volt AC, 30 Amp, single phase,
60 Hz electrical loads.
C
A
(2×) 120V AC, 20A (NEMA 5-20R)
May be used to supply electrical power for
operation of 120 Volt AC, 20 Amp, single phase,
60 Hz electrical loads.
WARNING
Do not operate a device while it is plugged into the 12V DC
outlet. Prolonged exposure to engine exhaust can cause
serious injury or death. While charging a device do no place
on the exhaust side of the generator. Extreme heat caused
by exhaust can damage the device, and cause a potential fire
hazard.
1
2
3
9
7
4
5
6
A
C
b
8