![background image](http://html.mh-extra.com/html/champion/100738/100738_operators-manual_2588589018.webp)
100738 - 224cc ENGINE
SPEcIfIcATIONS
18
SPEcIfIcATIONS
Engine Specifications
Engine
.............................................
224cc OHV CPE
PTO Rotation
....................................
Counterclockwise
Ignition Mode
....................................................
TCI
Displacement
.................................................
224cc
Torque (max)
.................................
13 N.m at 2500 RPM
Compression
..................................................
8.8:1
Output Shaft
..........................
19.05 mm x 58.5 (61.7) mm
End Hole
...................................
Tapped 5/16 in. 24 UNF
Fuel Capacity
....................................
0.8 gallons (3.1 L)
Gross Weight
.....................................
41.2 lb. (18.7 kg)
Net Weight
..........................................
35.3 lb. (16 kg)
Height
..............................................
14.6 in. (37 cm)
Width
.............................................
10.8 in. (27.5 cm)
Length
...........................................
15.2 in. (38.5 cm)
Mount Bolt Pattern Width (in./mm)
...............
6.4 in. (162 mm)
Mount Bolt Pattern Height (in./mm)
...............
3.1 in. (78 mm)
Oil Specifications
DO NOT OVERFILL.
Type
................................................
See chart below
Capacity
........................................
16.9 fl. oz (500 ml)
-20
0
20
40
60
Ambient temperature
Recommended Engine Oil Type
80
100
120
-28.9
°F
°C
-17.8
-6.7
4.4
15.6
26.7
37.8
48.9
10W-30
5W-30 Full Synthetic
10W-40
5W-30
NOTIcE
Temperature will affect engine oil and engine performance.
Change the type of engine oil used based on temperature
shown in the
“Recommended Engine Oil Type”
table.
fuel Specifications
Use unleaded gasoline with a minimum octane rating of 87 and
an ethanol content of 10% or less by volume. DO NOT USE E15 or
E85. DO NOT OVERFILL.
Gasoline Capacity
...................................
0.8 gal. (3.1 L)
Spark Plug Specifications
OEM Type
.............................................
NHSP F6RTC
Replacement Type
.....................
NGK BPR6ES or equivalent
Gap
.................................
0.028-0.031 in. (0.7-0.8 mm)
Valve Specifications
Intake Clearance
..............
0.0039-0.0059 in. (0.10-0.15 mm)
Exhaust Clearance
...........
0.0059-0.0079 in. (0.15-0.20 mm)
NOTIcE
A technical bulletin regarding valve adjustment procedures is
available at www.championpowerequipment.com.
Key Shaft
NOTIcE
an important message about temperature:
Your product
is designed and rated for continuous operation at ambient
temperatures up to 104°F (40°C). When needed, it may be
operated at temperatures ranging from 5°F (-15°C) to 122°F
(50°C) for short periods of time. If exposed to temperatures
outside this range during storage, it should be brought back
within this range before operation. In any event, the product
must always be operated outdoors, in a well-ventilated area
and away from doors, windows and vents.