7
ENGLISH
100387
Power Panel
CONTROLS AND fEATURES
(1) Fuel Valve Knob
(2) Choke
(3) Economy Control Switch
(4) Ground Terminal – Consult an electrician for local
grounding regulations.
(5) 12V DC Automotive Outlet*
(6) Circuit Breaker (Push-button) – Protects the
generator against electrical overload.
(7) Parallel Outlets – Used for parallel operation.
(8) 120 Volt AC, 20 Amp Duplex (5-20R) – May be
used to supply electrical power for the operation
of 120 Volt AC, 20 Amp, single phase 60 Hz
electrical loads.
(9) 120 Volt AC, 30 Amp Twist-Lock Receptacle
(NEMA L5-30R)–
May be used to supply electrical
power for the operation of 120 Volt AC, 30 Amp,
single phase 60 Hz electrical loads.
(10) Output Light – Remains ON during normal
operating conditions. Shuts OFF when generator is
overloaded.
(11) Overload Indicator Light – This light turns ON
when the generator is overloaded and will cut
power to the receptacles.
(12) Oil Warning Light – Check oil level when this light
turns on. Engine will not run when indicator is lit.
(13) Engine Switch – Used to start or stop the
generator.
1
2
4
5
6
9
3
13
10
11
12
8
*Warning: Do not operate a device while it is plugged into the 12V DC outlet. Prolonged exposure to engine exhaust can cause
serious injury or death. While charging a device, do no place on the exhaust side of the generator. Extreme heat caused by
exhaust can damage the device, and cause a potential fire hazard.
6
7
