![background image](http://html.mh-extra.com/html/champion/100379/100379_operators-manual_2588970014.webp)
100379 - FRONT TINE TILLER
ASSEMBLY
14
2. Mount the outer tines using the removed cotter bolts and
pins:
Install Speed Control
1. Mount speed control assembly to upper handle bar using
(1) M6 bolt, (1) flat washer and (1) M6 lock nut.
Add Engine Oil
1. Place tiller on a flat, level surface.
2. Put the wheels in the WHEEL DRIVE position.
3. Remove oil fill cap/dipstick to add engine oil.
4. Using a funnel, add up to 0.6 qt. (0.6 L) of oil and replace
oil fill cap/dipstick. DO NOT OVERFILL.
5. Check engine oil level and add as needed.
MAX
MIN
OIL DIP STICK
VARILLA DEL ACEITE
JAUGE D'HUILE
MAX
MIN
OIL DIP STICK
VARILLA DEL ACEITE
JAUGE D'HUILE
MAX
MIN
-20
0
20
40
60
Ambient temperature / Temperatura ambiente / Température ambiante
Recommended Oil Type / Tipo de aceite recomendado / Type d’huile recommandé
80
100
120
-28.9
°F
°C
-17.8 -6.7 4.4
15.6 26.7 37.8
48.9
10W-30
5W-30 Synthetic / Sintético / Synthétique
10W-40
5W-30
Add Fuel
1. Use clean, fresh, regular unleaded gasoline with a
minimum octane rating of 85 and an ethanol content of
10% or less by volume.
y b c
2. DO NOT mix oil with gasoline.
3. Remove the gasoline cap.
4. Slowly add gasoline to the tank. DO NOT OVERFILL.
Gasoline can expand after filling. A minimum of
¼
in. (6.4 mm)
of space left in the tank is required for gasoline expansion
although more than
¼
in. (6.4 mm) is recommended. Gasoline
can be forced out of the tank as a result of expansion if
overfilled and can affect the stable running condition of the
tiller.