Champion instruments Scepter III, Getting Started Manual

Page: 7 / 27

•
Operating temperature: -10+ 60
℃
•
Storage temperature: -30
℃
~+70
℃
•
Drop: 1.2m drop onto all faces
•
Casing: Dustproof and resistant to heavy wind-driven rain per IP65 standard
•
Humidity: 5% ~ 95% (non-condensing)
•
Clean the display with a soft cloth, and be careful not to wipe the display with abrasive
chemicals of any kind . Do not expose your device to extreme heat
(
60
℃）
or cold (-10
℃
)
For example, do not leave it in the trunk of your car exposed to high heat.
•
Do not attempt to open the device other than as instructed in this manual
•
Rough handling can break internal circuit structure
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
•
Use only the recommended accessories.
•
Do not excessive sound pressure from earphones and headphones. Note that this can
cause hearing loss.
USB Data Cables
•
Insert the USB data cable connector into the USB interface of the Scepter III
•
Connect the other terminal of the USB data cable with the USB interface of your PC
•
This version supports a USB interface. You can connect your Scepter III with your PC via the
USB & Data cable. You can also copy or move the files to and from your Scepter III and PC,
browse the images, or record files and video files saved in the Scepter III, accessed on your
PC
Auto power off
Select ‘Start
→
S ettings
→
Sy stem
→
P ower
→
A dvanced’, set the power off time
conditionally
Remove programs
Select ‘Start
→
S ettings
→
S ystem
→
R emove Programs’, select the program in the list and
click ‘OK’ to remove
Restore Factory Defaults
Select ‘Start
→
S ettings
→
S ystem
→
C lean Boot, restore factory
defaults settings according to the guide Caution: All the data and
programs will be lost, If restore factory defaults setting
4. Environmental Specifications
6
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Champion Instruments ,LLC
678-386-2208 | http://www.championinstruments.com