3
C.
Outdoor wall mount kit installation(optional)
1.
Position the outdoor kit at the desired installation location. Drill two holes into the placement and hammer
the included screw anchors.
2.
Assembly silicone rubber and outdoor kit together.
3.
Combine O-ring and supplied screws together, then insert to the corresponding hole and fix them.
4.
Feed the cables through conduit hole A or B. If you want to use hole A, remove the plug with a screwdriver.
Thread the network and I/O cable through thread-lock sealing nut, claw (using the claw to round all cable)
and cable gland. To seal all cable in the claw part tightly in case of water leaking. Attach the cable gland to
the conduit hole. Push the claw into the cable gland and tighten thread-lock sealing nut to secure the cables.
Then, secure the camera to the outdoor kit with screws (M2.5x6 * 2pcs)
5.
Paste the waterproof-tape at microphone hole on the top cover.
6.
Adjust the angle of camera to aim the shooting area.
Conduit hole B
Conduit hole A
Note: Once waterproof sticker is pasted on top
cover for outdoor used, microphone reception
will be affected.
