background image

Garage Door Opener

Owner’s Manual

FOR RESIDENTIAL USE ONLY

The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196

Model Series 1000E - 1/4 HP

Model Series 5000E - 1/2 HP

Model Series 4000E - 1/2 HP

Model Series 2000E - 1/3 HP

CAUTION! PLEASE READ THIS MANUAL CAREFULLY!

The MODEL NUMBER label is located on the front panel of your opener.

FASTEN THIS MANUAL NEAR THE GARAGE DOOR AFTER INSTALLATION.

PERIODIC CHECKS OF THE OPENER ARE REQUIRED TO INSURE SATISFACTORY OPERATION.

CONTENTS

PAGE

Safety Rules .....................................................................2

Features of Your Opener..................................................3

Specifications ...................................................................3

You'll Need Tools .............................................................3

Completed Installation Illustration ....................................4

Operation of Your Opener ................................................5

Accessories ......................................................................5

Care & Maintenance of Your Opener ...............................6

Assembly Instructions ......................................................7

Installation Instructions ...................................................10

Travel Limit Adjustments ................................................20

CONTENTS

PAGE

Force Adjustments .........................................................21

Safety Reverse Test .......................................................22

The Protector System™ .................................................22

Code Programming Instructions .....................................23

Having a Problem? ...................................................24, 25

Carton Contents & Hardware Illustrated.........................26

Repair Parts, Rail Assembly...........................................26

Repair Parts, Installation ................................................26

Repair Parts, Opener Assembly .....................................27

How To Order Repair Parts ............................................28

Warranty .........................................................................28

Summary of Contents for Series 1000E





























Reviews: