5
RIGID MOUNTING SURFACE
VERTICAL MOUNTING
SLOTS IN FRAME TO
ADJUST CHAIN TENSION
MOUNTING HARDWARE
NOT SUPPLIED
PULL ROPE
FOR MANUAL
OPERATION
USER SUPPLIED COMPONENTS
Mounting Hardware
Electrical Conduit and Wiring
SITE PREPARATIONS (CON’T)
IMPORTANT INSTALLATION INSTRUCTIONS
To reduce the risk of severe injur y or death
:
WARNING
CAUTION
WARNING
WARNING
WARNING
Please read the following warnings before proceeding to the installation section.
1. READ AND FOLLOW ALL INSTALLATION
WARNINGS AND INSTRUCTIONS.
2. Install garage door opener only on properly
balanced and lubricated garage door. An
improperly balanced door may not reverse
when required and could result in severe
injury or death.
3. All repairs to cables, spring assemblies
and other hardware MUST be made by a
trained door systems technician before
installing opener.
4. Disable all locks and remove all ropes
connected to garage door before installing
opener to avoid entanglement.
5. Install garage door opener 6 feet or more
above th floor.
6. Mount emergency release handle 5 feet
above floor
7. NEVER connect garage door opener to
power source until instructed to do so.
8. NEVER wear watches, rings or loose clothing
while installing or servicing opener. They
could be caught in garage door or opener
mechanisms.
9. Install wall-mounted garage door control:
within sight of the garage door.
out of reach of children at minimum height
of 5 feet.
away from all moving parts of the door.
10. Place entrapment warning label on wall next
to garage door control.
11. Place manual release/safety reverse test label
in plain view on inside of garage door.
12. Upon completion of installation, test safety
reversal system. Door MUST reverse on
contact with a one-inch high object (or a 2x4
laid flat) on the floor.
GAP BETWEEN BOTTOM
OF DOOR AND FLOOR
MUST NOT EXCEED 1/4”
