5
AUDIO FEEDBACK FROM THE UNIT:
1 Low Tone Beep = Failure
2 Two High Tone Beeps = Valid sequence
3 Low Tone Beep = Error or invalid sequence
NOTE:
Use the STAR Key “*” to cancel any input.
NOTE:
Keypad commands are to be entered in a single string to result in success (indicated by double high tone).
Stop and go keystrokes will result in negative tones (low single and triple fail tones).
PROGRAMMING
» QUICK REFERENCE
KEYPAD PROGRAMMING
PROGRAMMING NUMBER
DESCRIPTION OF TASK
FACTORY SETTING
PROGRAMMING PROCEDURE
1
Trigger Relay One
Master Code (4 digits) + 1
2
Trigger Relay Two
Master Code (4 digits) + 2
7
Delete User Code
Master Code (4 digits) + 7 + User Code that is to be deleted
(4 digits)
9
Enter User Code
Master Code (4 digits) + 9 + New User Code
(4 digits) + Relay Associated with the User Code (1 or 2)
03
Enable Intercom (No-Telco) Mode
Master Code (4 digits) + 03
04
Enable Telco Mode
Enabled
Master Code (4 digits) + 04
06
Speaker Volume
Level 2
Master Code (4 digits) + 06 + Volume Level
(1 = Low, 2 = Medium or 3 = High)
07
Microphone Sensitivity
Level 2
Master Code (4 digits) + 07 + Volume Level
(1 = Low, 2 = Medium or 3 = High)
09
Change the Master Code
Master Code (4 digits) + 09 + ### + New Master Code
(4 digits)
51
Create Temporary (1 Shot) Code
Master Code (4 digits) + 51 + New Temporary (1 Shot) Code
(4 digits) + Relay Associated with the User Code (1 or 2)
(Expires after 24 hours)
52
Enable Vacation (Lock Down)
Mode
Disabled
Master Code (4 digits) + 52
53
Disable Vacation (Lock Down)
Mode
Master Code (4 digits) + 53
54
Engage Party Mode (Relay 1)
Disabled
Master Code (4 digits) + 54
56
Engage Party Mode (Relay 2)
Disabled
Master Code (4 digits) + 56
021
Enable Parallel Relay Output
Enabled
Master Code (4 digits) + 021
023
Enable Independent Relay Output
Control
Disabled
Master Code (4 digits) + 023
024
Adjust Relay Output Time (Relay 1)
.5 Seconds
Master Code (4 digits) + 024 + Relay Output Time (0000-8000
Seconds)
NOTE:
Relay output time is ALWAYS 4 digits.
025
Adjust Relay Output Time (Relay 2)
.5 Seconds
Master Code (4 digits) + 025 + Relay Output Time (0000-8000
Seconds)
NOTE:
Relay output time is ALWAYS 4 digits.
DIRECT COMMANDS FROM THE UNIT KEYPAD
KEYSTROKES
ACTION
User Code + 1
Triggers Relay 1
User Code + 2
Triggers Relay 2
