5
Operation
Enter existing Master PIN Number on Keypad:
0
9
Enter new Master PIN Number:
Chan
g
e Master PIN Number
“BEEP”
“BEEP”
A temporary PIN Number can be used only once
within a 24 hour period.
NOTE:
The WKP5LM can hold up to 5 Temporary
PIN Numbers while the WKP250LM can hold 15.
Enter Master PIN Number on Keypad:
5
1
Enter temporary PIN Number:
If the temporary PIN Number applies only to a certain
Receiver, enter the PIN Number followed by the
Receiver Identity (1-4). The result will be a five digit
PIN Number (example: 12341).
Temporary PIN Numbers
“BEEP”
“BEEP”
The WKP5LM can support up to 5 PIN Numbers
while the WKP250LM can support 250.
Enter Master PIN Number on Keypad:
9
Enter new PIN Number:
Addin
g
PIN Numbers
“BEEP”
“BEEP”
Enter Master PIN Number on Keypad:
7
Enter PIN number you want to remove:
A triple beep indicates a PIN Number has been
entered that does not exist. The Master PIN Number
cannot be deleted.
Erasin
g
PIN Numbers
“BEEP”
“BEEP” “BEEP”
To use Keypad, enter any valid PIN Number. With
multiple Receivers, enter the PIN Number followed by
the Receiver Identity (1-4).
Mount Keypad
Step 1
Choose mounting location for Keypad. Remove the
back panel and attach it to a solid surface or post.
Mount the Keypad onto the back panel with screws.
Tighten screws with Allen wrench.
Step 2
It is recommended that Keypad be mounted to a
Gooseneck post or non-metallic surface. If it is
necessary to mount Keypad to a metal surface, use a
non-metallic spacer to move the Keypad away from
the metal surface.
