Loop Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Photo/Edge Inputs (P6-7-8 and 9) . . . . . . . . . . . . . . . . . . . . . . .32
Safety Accessories for Secondary Entrapment Protection . . . . .33
Operation
34
Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Manual Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Maintenance
35-36
Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Basic Control Board Layout
37
Wiring Diagram
38
Troubleshooting
39-40
Repair Parts
41-42
LA400 Swing Gate Accessories
43
Warranty Policy and Service
44
When you see these Safety Symbols and Signal Words on the
following pages, they will alert you to the possibility of
serious
injury
or
death
if you do not comply with the warnings that
accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will
alert you to the possibility of damage to your gate and/or the gate
operator if you do not comply with the cautionary statements that
accompany it. Read them carefully.
Mechanical
Electrical
WARNING
CAUTION
IMPORTANT NOTE
• BEFORE attempting to install, operate or maintain the operator,
you must read and fully understand this manual and follow all
safety instructions.
• DO NOT attempt repair or service of your commercial door and
gate operator unless you are an Authorized Service Technician.
WARNING
TOOLS NEEDED FOR INSTALLATION
During assembly, installation and adjustment of the operator the
tools listed below will be needed.
• Wrench or Socket Set
• Phillips Head Screwdriver
• C Clamps
• Level
• Small Screwdriver
• T25 Torx Head Screwdriver
TABLE OF CONTENTS
INTRODUCTION
Introduction
2-5
Carton Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Additional Items Needed for Installation . . . . . . . . . . . . . . . . . . .3
Operator Dimensions and Specifications . . . . . . . . . . . . . . . . . . .3
UL325 Classifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Installation Information . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Overview of Typical Installation
6-10
Left-Hand Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Right-Hand Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Dual Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Safety Precautions for Swing and
Ornamental “Grill Type Gates” . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Warning Sign Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Before Installation Check Your Gate . . . . . . . . . . . . . . . . . . . . . . .9
Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installation
11-18
Step 1: Manual Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Step 2A: Determine Position of the Pull-to-Open Bracket . . . . .12
Step 2B: Determine Position of the “Optional”
Push-to-Open Bracket (Not Provided) . . . . . . . . . . . . . . . . . . . .12
Step 3: Determine Mounting Location . . . . . . . . . . . . . . . . . . . .13
Step 4: Assemble Gate Post Bracket (Pull-to-Open) . . . . . . . . . .13
Step 5: Attach Bracket to Arm . . . . . . . . . . . . . . . . . . . . . . . . . .14
Step 6: Position Operator on Gate . . . . . . . . . . . . . . . . . . . . . . .14
Step 7: Test Gate Travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Step 8: Secure Gate Post Bracket to Gate Post . . . . . . . . . . . . .16
Step 9: Secure Gate Bracket to Gate . . . . . . . . . . . . . . . . . . . . . .16
Step 10: Warning Sign Placement . . . . . . . . . . . . . . . . . . . . . . .17
Step 11: Open the Control Box . . . . . . . . . . . . . . . . . . . . . . . . . .18
Step 12: Select Mounting Holes . . . . . . . . . . . . . . . . . . . . . . . . .18
Step 13: Mount Control Box . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Motor Wiring
19-20
Step 1: Watertight Connector Nut . . . . . . . . . . . . . . . . . . . . . . .19
Step 2: Insert Operator Cable . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Step 3: Connect Operator to Control Board . . . . . . . . . . . . . . . .20
Power Wiring
21-22
Connect Transformer to Control Board . . . . . . . . . . . . . . . . . . .21
Earth Ground Rod Installation (Optional) . . . . . . . . . . . . . . . . . .22
Control Wiring
23
Adjusting/Running the Operator
24-26
Step 1: Set Dip Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Step 2: Program Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Step 3: Set Force/Bi-part/Timer . . . . . . . . . . . . . . . . . . . . . . . . .26
Optional Control and
Safety Device Wiring
27-33
To Add or Reprogram a Remote Control . . . . . . . . . . . . . . . . . .27
Dip Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Wire Stop Button (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
2
Summary of Contents for LA400
Page 45: ......
