Chamberlain APEX Access Device Installation And Operation Manual Download Page 4

41

WARRANTY & DISCLAIMER 

Chamberlain Access Solutions warrants its products and equipment to 

conform to its own speci

fi

 cations and to be free from defects in materials 

and workmanship, under normal use and service, for a period of two 

years from the date of shipment. Within the warranty period, Chamberlain 

Access Solutions will repair or replace, at its option, all or any part of 

the warranted product which fails due to materials and/or workmanship. 

Chamberlain Access Solutions will not be responsible for the dismantling 

and/or re-installation charges. To utilize this warranty, the customer must 

be given a Return  Goods Authorization (RGA) number by Chamberlain 

Access Solutions The customer must pay all shipping costs for returning 

the product.
This warranty does not apply in cases of improper installation, misuse, 

failure to follow the installation and operating instructions, alteration, 

abuse, accident, tampering, natural events (lightning, 

fl

 ooding,  storms, 

etc.), and repair by anyone other than Chamberlain Access Solutions. This 

warranty does not warrant the replacement of batteries that are used to 

power our products.
This warranty is exclusive and in lieu of all other warranties, expressed or 

implied, including but not limited to the implied warranties of merchantability 

and 

fi

 tness for a particular purpose. Chamberlain Access Solutions will 

not be liable to anyone for any consequential or incidental damages for 

breech of this warranty or any other warranties.
This warranty will not be modi

fi

 ed or varied. Chamberlain Access Solutions 

does not authorize any person to act on its behalf to modify or vary this 

warranty. This warranty applies to Chamberlain Access Solutions products 

only. All other products, accessories, or attachments used in conjunction 

with our equipment, including batteries, will be covered solely by their own 

warranty, if any. Chamberlain Access Solutions will not be liable for any 

direct, incidental, or consequential damage or loss whatsoever, caused by 

the malfunction of product due to products, accessories, or attachments 

of other manufacturers, including batteries, used in conjunction with our 

products.
The customer recognizes that a properly installed and maintained security 

system may only reduce the risk of events such as burglary, robbery, 

personal injury, and 

fi

 re. It does not insure or guarantee that there will 

be no death, personal damage, and/or damage to property as a result. 

Chamberlain Access Solutions does not claim that the Product may not 

be compromised and/or circumvented, or that the Product will prevent any 

death, personal and/or bodily injury and/or damage to property resulting 

from burglary, robbery, 

fi

 re, or otherwise, or that the Product will in all 

cases provide adequate warning or protection. 
Chamberlain Access Solutions products should only be installed by quali

fi

 ed 

installers. The customer is responsible for verifying the quali

fi

 cations of the 

selected installer.

Summary of Contents for APEX Access Device

























Reviews: