2
en
Basic Programming
Program to Operator
Set Master Code
Program your regular 4-digit PIN
The 850EV Keypad must be put into programming mode prior to any of the programming steps below unless otherwise indica-
ted. The 6-digit Master Code is used to prevent unauthorized access to the system. A Master Code is required (factory default
code: 888888) to setup the 850EV Keypad. It is highly recommended to change and record your unique Master Code.
The keypad backlight will remain on if the product is in programming mode. While in programming mode, if an invalid Master
Code is entered, an error tone will sound. The keypad will remain in programming mode. After 60 seconds of inactivity, the
keypad will exit the programming mode.
NOTE:
An error tone will sound if the maximum number of PINs is exceeded or if user tries to program a PIN already
programmed in the memory.
NOTE:
The Master Code and a PIN need to be set before the operator can be connected to keypad. See Basic Programm-
ing.
The keypad is now programmed to the operator.
Programming Step
Keystroke Combination
Indicator
1. Enter program mode
* (Master Code) #
Long tone
2. Update Master Code
09 # (New 6-digit Code) # (New 6-digit Code) #
Long tone
3. Exit Program Mode
* * #
Keypad backlight will turn off
Programming Step
Keystroke Combination
Indicator
1. Enter program mode
* (Master Code) #
Long tone
2. Set new PIN
01 # (New 4-digit PIN) # Repeat (new 4-digit PIN) #
Long tone
3. Exit Program Mode
* * #
Keypad backlight will turn off
1. Press the Learn Button on the operator.
2. Within 30 seconds - Enter a valid 4-digit PIN then press #. A long tone will sound.
Additional Programming
To set up following features the keypad must be put into programming mode first.
A temporary 4-digit PIN can be programmed to allow access to visitors (maximum of 9 uses). The temporary PIN cannot be
the same as any previously programmed PIN. The keypad will store up to 10 unique temporary PINs.
Set Temporary PIN
Programming Step
Keystroke Combination
Indicator
1. Enter program mode
* (Master Code) #
Long tone
2. Set Temporary PIN
05 # (New temporary 4-digit PIN) # (New temporary
4-digit PIN) # Number of uses (9 maximum) #
Long tone
3. Exit Program Mode
* * #
Keypad backlight will turn off
