3
en
Delete Permanent or Temporary PIN
Reset Master Code
Reset Keypad
Lockout Mode (Default is ON)
Resetting the Master Code will not remove PINs or temporary PINs from memory. After resetting the Master Code, the keypad
will not operate any previously programmed operators until they are reprogrammed. To reset the Master Code to the factory
default (888888):
Resetting the keypad will erase the Master Code, all permanent PINs and all temporary PINs. All settings will be set to factory
default. After resetting, the keypad will not operate the previously programmed operators until they are reprogrammed. To
reset the keypad:
If the keypad receives five consecutive invalid PINs, the keypad will enter lockout mode and will not accept any keypad inputs
for 30 seconds. After 30 seconds, the keypad will begin accepting new inputs.
Programming Step
Keystroke Combination
Indicator
1. Enter program mode
* (Master Code) #
Long tone
2. Delete PIN
07 # (4-digit PIN to be deleted) # (4-digit PIN to be
deleted) #
Long tone
3. Exit Program Mode
* * #
Keypad backlight will turn off
1. Unlock and remove the front cover.
2. Press and hold the RESET button on the control board for 6 seconds. A long tone sounds indicating the Master
Code has been reset.
1. Unlock and remove the front cover.
2. Press and hold RESET button on the control board for 6 seconds until a long tone sounds, then release.
3. Press and hold RESET button on the control board for 15 seconds, 3 long tones will sound indicating the keypad has been
reset.
Programming Step
Keystroke Combination
Indicator
1. Enter program mode
* (Master Code) #
Long tone
2. Set Lockout mode to
ON
02 # 1 #
Long tone
3. Exit Program Mode
* * #
Keypad backlight will turn off
Programming Step
Keystroke Combination
Indicator
1. Enter program mode
* (Master Code) #
Long tone
2. Set Lockout mode to
OFF
02 # 0 #
Long tone
3. Exit Program Mode
* * #
Keypad backlight will turn off
