SAFE DIAGRAM
-1-
Locking
knob
LCD (display)
Key lock
cover
(Yellow)
#(Green)
Instructions
4 x ‘AA’
batteries
Back-up power supply
Override keys
4 x rawlbolts
Number
pad
Dia.1
NOTE:
This safe is NOT fire proof.
NOTE:
This safe has no cash rating.
CONTENTS
1 X Instruction book
2 X Manual override keys
1 X Backup power supply
1 X Internal mat
4 X ‘AA’ Batteries
4 X Rawlbolts
SPECIFICATION
T-25LCD
SIZE :
35 (w) x 25 (h) x 25 (d) Cm
NET WEIGHT:
9.15Kgs
POWER SUPPLY:
4x ‘AA’ 1.5V Batteries
INTERNAL VOLUME:
21.72 Litre
IMPORTANT INFORMATION
This safe can be programmed with two sets of codes, User and Master. After opening the safe and
installing the batteries you should change the USER and MASTER PINS, from the factories pre-set
codes, for security reasons. You could give the user code to a guest while maintaining the master code.
OPERATING THE SAFE FOR THE FIRST TIME
Use the Manual override key to open the safe.
Remove the plastic key lock cover (dia 1).
•
The number under the cover is the key number. Replacement keys are unavailable!
•
Insert the override key; turn it anti-clockwise, at the same time turn the locking knob clockwise and pull
•
open the safe.
See
•
BATTERY REPLACEMENT
Keep the safe door open until you have set the PIN code.
•
LCD DISPLAY
To hide the numbers from being displayed when entered, Press “#” followed by “
•
“, then enter your
PIN. “o” will be displayed instead of the number.
