3.0 Maintenance Guide
10
Figure 4
3.3.2 Backgauge Leadscrew
With the top cover ON, place machine on a flat level surface on it’s left side. Use any brand-name
type of grease or light oil to lubricate backgauge leadscrew (Figure 5). It may be helpful to use a
small brush to apply grease. Note: the leadscrew may be lubricated with grease or oil. Oil has a
tendency to run off and must be lubricated more frequently; grease tends to collect paper dust and
must be cleaned off periodically.
Figure 5
3.4 Adjustments
Some of the following tests require the machine to be operational for
checking and adjusting. Be very careful that tools and other people are clear of moving parts and that
the cutter is not accidentally operated while adjustments are being made. Whenever possible,
disconnect the power and lock it out (see SAFETY PRECAUTIONS, page 4) unless the directions
specifically require the machine to be powered.
Grease Leadscrew
Apply Oil
Summary of Contents for SPARTAN 150 M
