APR 2018
CMT-330TC Three-Knife Trimmer
1-3
1. Introduction
1.3 Warning Label Definitions
Warning labels are posted throughout the ma-
chine to indicate areas where physical injury
may occur.
Read the instruction manual.
The instruction manual should be
read and understood before operat-
ing this machine.
Do not operate with more than
one person!
One person only should operate
this machine at a time.
Cut / Crush Hazard!
Do not operate with covers re-
moved.
Do not disable safety devices.
Crush Hazard!
Do not operate with covers re-
moved.
Do not disable safety devices.
Crush / Entanglement Hazard!
Do not operate with covers or
guards removed.
Electrical Shock Hazard!
Disconnect power before removing
cover.
Electrical Shock Hazard!
Disconnect power before removing
cover.
1.4 Note Definitions
The formats of three specific types of notes
found throughout this manual indicate the level
of danger or importance associated with the task
presented. The format of warning notes, caution
notes, and regular notes imply a certain level of
danger. The following examples give a descrip-
tion. Associate the text format with its level of
danger or importance.
Warning Definition:
WARNING
A warning indicates an operating or mainte-
nance procedure, practice, or condition that,
if not strictly observed, could result in injury
or loss of life.
Caution Definition:
CAUTION
A Caution indicates an operating or mainte-
nance procedure, practice, or condition that, if
not strictly observed could result in damage to,
or destruction of, equipment.
Note Definition:
Note: A regular note indicates an operating or
maintenance procedure, practice, or condition
that is necessary to accomplish a task efficiently.
1.5 Safety
Before installing or operating any equipment, it
is important to take precautions. Read and thor-
oughly understand the safety precautions out-
lined below.
This machine is designed for one-person
operation. Never operate the machine
with more than one person.
Safe use of this machine is the responsi-
bility of the operator. Use good judgment
and common sense when working with
and around the machine and its accesso-
ries.
Read and understand all instructions thor-
oughly before using the machine. If ques-
tions remain, contact your Authorized
Challenge Dealer. Failure to understand
the operating instructions may result in
personal injury.
Only trained and authorized individuals
should operate this machine.
Only trained and authorized service tech-
nicians should service this machine.
Do not alter safety guards or devices.
They are there for your protection. Severe
laceration or dismemberment may result if
safety devices are altered.
Disconnect power and lock out before per-
forming any maintenance. See Section
1.6 , Power Lockout Procedure.
Observe all caution and instruction labels
on this machine.
Be extremely careful when handling and
changing knives. Severe lacerations or
dismemberment could result from careless
handling procedures.
Summary of Contents for CMT-330TC
Page 4: ...APR 2018 CMT 330TC Three Knife Trimmer iv Introduction Notes...
Page 28: ...APR 2018 CMT 330TC Three Knife Trimmer 1 24 1 Introduction NOTES...
Page 60: ...APR 2018 CMT 330TC Three Knife Trimmer 3 12 3 Operator s Guide NOTES...
Page 72: ...APR 2018 CMT 330TC Three Knife Trimmer 4 12 4 Routine Tasks NOTES...