background image

HELPLINE NO 08448012949

4

OrIgINaL INstructIONs

sYMBOLs

e) Do not subject cells or battery pack to 

mechanical shock.

f)  In the event of a cell leaking, do not allow 

the liquid to come in contact with the skin 

or eyes. If contact has been made, wash 

the affected area with copious amounts 

of water and seek medical advice.

g) Do not use any charger other than that 

specifically provided for use with the 

equipment.

h) Observe the plus (+) and minus (–) 

marks on the cell, battery and equipment 

and ensure correct use.

i)  Do not use any cell or battery pack 

which is not designed for use with the 

equipment.

j)  Do not mix cells of different manufacture, 

capacity, size or type within a device.

k)  Keep cells and battery pack out of the 

reach of children.

l)  Seek medical advice immediately if a cell 

or a battery pack has been swallowed.

m) Always purchase the correct cell or 

battery for the equipment.

n) Keep cells and battery pack clean and 

dry.

o) Wipe the cell or battery pack terminals 

with a clean dry cloth if they become 

dirty.

p) Secondary cells and battery pack need 

to be charged before use. Always use 

the correct charger and refer to the 

manufacturer’s instructions or equipment 

manual for proper charging instructions.

q) Do not leave a battery pack on prolonged 

charge when not in use.

r)  After extended periods of storage, it may 

be necessary to charge and discharge 

the cells or battery pack several times to 

obtain maximum performance.

s)  Secondary cells and battery pack give 

their best performance when they are 

operated at normal room temperature 

(20°C ± 5°C).

t)  Retain the original product literature for 

future reference.

u) Use only the cell or battery pack in the 

application for which it was intended.

v)  When possible, remove the battery pack 

from the equipment when not in use.

w) Dispose of properly.

To reduce the risk of injury, user 

must read instruction manual

Wear ear protection

Wear eye protection

Wear dust mask

Warning

Indoor use only

Do not expose to rain or water

Do not burn

This product has been marked 

with a symbol relating to removing 

electric and electronic waste. This 

means that this product shall not 

be discarded with household waste 

but that it shall be returned to a 

collection system which conforms 

to the European Directive 2002/96/

CE. It will then be recycled or 

dismantled in order to reduce the 

impact on the environment. Electric 

and electronic equipment can be 

hazardous for the environment 

and for human health since they 

contain hazardous substances.

Summary of Contents for CSD36L.1













Reviews: