Challenge Xtreme BMS210K.1, User Manual

Page: 5 / 16

HELPLINE NO 08707252949
5
3. The laser beam shall not be deliberately
aimed at another person and shall be
prevented from being directed towards
the eye of a person for longer than 0.25
seconds area.
4. Always ensure the laser beam is
aimed at a sturdy work piece without
reflective surfaces, e.g. wood or rough-
coated surfaces are acceptable. Bright
shiny reflective sheet steel or similar is
not suitable for laser applications as the
reflective surface may direct the laser beam
back at the operator.
5. Do not change the laser device with
a different type. The manufacturer or an
authorized agent must carry out repairs.
6. CAUTION: Use of controls or adjustments
other than those specified herein may result
in hazardous radiation exposure.
WARNING:
LASER RADIATION
DO NOT STARE INTO BEAM
Wave length 650nm
Power max. <1 mW
EN60825-1
CLASS 2 LASER PRODUCT
SYMBOLS
Read the manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Do not put hand in
WEEE marking