Chainway C2000W, Terminal User Manual

Page: 13 / 65

Pic 2.2-1
2.3 Stand-by and Wake-up
2.3.1 Suspend
We can save the power by pressing once lightly to set the device into the status of
suspend, then in the new interface, there would be three options including suspend, shutdown
and cancel, and choose ‘Suspend’.
The device will enter the status of stand-by automatically once there is no operation for a long
time when it is powered on, in order that it can save the power. Please refer to Pic 3.4 for
detailed parameters. Pic 2.3-1
Pic 2.3-1
2.3.2 Wake-up
Press once lightly to wake up the device immediately when it is in the status of stand-by
in order that we can operate it normally.
2.3.3 Power on
For device being powered off, press once lightly, then it will boot and enter the system
after a few seconds.
2.3.4 Power off
For device being powered on, press tightly, then in the new interface, there would be
three options including suspend, shutdown and cancel, and choose ‘Shutdown’. Pic 2.3-2