CHAINTECH CT-6BJM, User Manual

Page: 47 / 58

Award BIOS Setup Program
43
3-8 Integrated Peripherals
This section provides information on setting peripheral devices. By choosing the
Integrated Peripherals option from the CMOS Setup Utility menu (Figure 3-1), the
screen below is displayed. This sample screen contains the manufacturer's default
values for the mainboard.
ROM PCI / ISA BIOS (jm69KC0C)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
ESC : Quit
F1 : Help
F5 : Old Values
F7 : Load Setup Defaults
:Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
Figure 3-9 Integrated Peripherals Setup Screen
A. On Board IDE Control
IDE HDD Block Mode
Specify the maximum number of sectors that can be transferred at a time.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (programmed Input/Output) fields let you set a PIO mode (0-
4) for each IDE device that the internal PCI IDE interface supports. Modes 0 through
4 provide successively increased performance. In Auto mode, the system
automatically determines the best mode for each device.
On-chip Primary/Secondary PCI IDE
You can set this to disable the On-chip IDE controller if you are going to add
a higher performance IDE boa
IDE HDD Block Mode : Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA : Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA : Auto
On-Chip Primary PCI IDE : Enabled
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support : Disabled
Init Display First : PCI Slot
Power On Function
:
BUTTON ONLY
Onboard FDC Controller : Enabled
FDC Write Protect : Disabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
COM2 Mode : Standard
Onboard Parallel Port : 378/IRQ7
Parallel Port Mode : SPP
PWR-ON After PWR-Fail : Off