CHAINTECH 7NJS Ultra User Manual Download Page 31

Page: 31 / 49

Chapter 4

7NJS User’s Guide

Please select [

Next

]

Please wait; select [

], after restart.

Select different channels according to you speakers

Chapter 5

7NJS User’s Guide

Chapter 5 Audio Device Application

This sound card supports Windows 95/98/ME/NT4.0/2000 operating systems.

To start the Audio Application Program simply select the

[Start]

→

[Program

Files]

→

[PCI Audio Applications]

→

[Audio Rack]

It includes the following options:

(1) Audio

Rack:

Which includes Audio Rack, CD Player, MIDI Player, Mixer and MP3
Player.

(2) Multi-Channel Audio Demo:

(Does not support Windows NT4.0)
A demonstration for the Multi-Channel Audio.

(3) Uninstall

Applications:

Which uninstalls the driver and all application programs for the Sound
card.

5.1 Audio Rack

Audio Rack includes 4 control panels:

C-Media Mixer Volume

CD Player

MIDI Player

MP3 WAVE Player

You can start the Audio Rack by selecting

【

Start

】→【

Program

】→【

PCI Audio

Applications

】→【

Audio Rack

】

CD Player Output
Configuration

MIDI Player Output
Configuration

MP3 WAVE Player
Configuration

Mixer Setup

Summary of Contents for 7NJS Ultra


















































Search results

Summary of Contents for 7NJS Ultra

Reviews:

Related manuals for 7NJS Ultra

Brands by name

Popular brands

CHAINTECH 7NJS Ultra, User Manual

Search results

Summary of Contents for 7NJS Ultra

Reviews:

Related manuals for 7NJS Ultra

Brands by name

Popular brands