Award BIOS Setup Program
37
3-7 Integrated Peripherals
A. On Board IDE Control
IDE HDD Block Mode
Specifies the maximum number of sectors that can be transferred at a time.
On-chip Primary/Secondary PCI IDE
You can set this to disable the On-chip IDE controller if you are going to add
a higher performance IDE board.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (programmed Input/Output) fields let you set a PIO mode (0-
4) for each IDE device that the internal PCI IDE interface supports. Modes 0
through 4 provide successively increased performance. In Auto mode, the system
automatically determines the best mode for each device.
B. COM2 Mode
When this function is Enabled, then the COM port will be redirected to support
IR function.
ROM PCI / ISA BIOS (2A59IC3E)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
:Select Item
PU/PD/+/-
: Modify
(Shift) F2
: Color
ESC : Quit
F1
: Help
F5
: Old Values
F7
: Load Setup Defaults
IDE HDD Block Mode
: Enabled
IDE Primary Master PIO
: Auto
IDE Primary Slave PIO
: Auto
IDE Secondary Master PIO
: Auto
IDE Secondary Slave PIO
: Auto
IDE Primary Master UDMA
: Auto
IDE Primary Slave UDMA
: Auto
IDE Secondary Master UDMA
: Auto
IDE Secondary Slave UDMA
: Auto
On-Chip Primary PCI IDE
: Enabled
On-Chip Secondary PCI IDE
: Enabled
Onboard FDC Controller
: Enabled
FDC Write Protect
: Disabled
PS/2 mouse function
: Enabled
Onboard Serial Port 1
: 3F8/IRQ4
Onboard Serial Port 2
: 2F8/IRQ3
COM2 Mode
: Standard
Figure 3-8 Integrated Peripherals Setup Screen
Onboard Parallel Port
: 378/IRQ7
Parallel Port Mode
: SPP
USB Keyboard Support
: Disabled
This section provides information on setting peripheral devices. By choosing the
Integrated Peripherals option from the CMOS Setup Utility menu (Figure 4-1), the
screen below is displayed. This sample screen contains the manufacturer's default
values for the mainboard.