CHAINTECH 5AGM, User Manual

Page: 37 / 58

Award BIOS Setup Program
33
C. Reset Configuration Data
When Enabled the system BIOS will clear/reset the ESCD during POST. After
clearing the ESCD, the BIOS will then change this item's value to "Disabled."
Otherwise, the ESCD data would become useless.
D. IRQ#/DMA# assign to
When resources are controlled manually, you can assign each system interrupt
& DMA channel for "Legacy ISA" or "PCI/ISA PnP" card used. While using Legacy
ISA Cards (non-PnP ISA cards), please set the necessary corresponding resources
(INT#, DMA#) from "PCI/ISA PnP" to "Legacy ISA."
@
All ISA non-PnP devices are legacy devices that select resources
(I/O Addr., INT# or DMA#) by using hardware jumpers on these devices.
@
IRQ-3/4/7/12/14/15 have been set as default for on board devices (COM2,
COM1, Printer port, PS/2 mouse, IDE1 and IDE2).
E. FDD IRQ Can Be Free
This function allows users to choose if the FDD IRQ is able to be freed for use
with other processes that require IRQ.
F. Assign IRQ For VGA
This function allows BIOS to make an IRQ available to VGA cards. Current VGA
card models do not require this function to be enabled.