CHAINTECH 5AGM, User Manual

Page: 19 / 58

Hardware Setup
15
1
3
2
5
4
6
Pin Definition
1 Data
2 Not Connected
3 Ground
4 +5V (fused)
5 Clock
6 Not Connected
B. PS/2 Mouse Connector
If a PS/2 mouse is used, BIOS will automatically detect
and assign IRQ12.
C. Dual Channel USB(Universal Serial Bus)
Connector
Enable the OnChip USB function in BIOS's Integrated
Peripherals Menu if you want to use a USB keyboard.
(See Section 3-7) Other USB devices do not require the
enabling of this function. USB is an open industry standard,
providing a simple and inexpensive way to connect up to
125 devices to a single computer port. Keyboards, mice,
tablets, digitizers, scanners, bar-code readers, modems,
printers and many more can all be used at the same time.
USB is a dynamically reconfigurable serial bus with an
elementary data rate of 12Mbps, based on off the shelf,
low cost micro-controller technology. It's modular layered
software protocol supports sophisticated devices and
application programs.
This board contains a USB Host controller and includes
a root hub with two USB ports (meets USB Rev 1.0 spec.).
Two USB peripherals or hub devices are able to be
connected.
Compatibility with different USB peripherals is
still being tested.