CHAFFOTEAUX ChaffoLINK 3318888, Assembly And Operation Instructions Manual

Page: 60 / 172

60
CHAFFOLINK
This chapter describes the installation procedure of Cha ff olink. We recommend
to start up the procedure making fi rst the gateway connection with the thermo-
regulation accessory and with the heating product. After that, it will be possible
to connect the gateway to the power supply and to fasten it to the wall through
the wall plate.
Important:
The installation of Expert Control is possible only with Cha ff oteaux products
running the Bus protocol. If there is an existing thermostat connected to the
heating system replace as follows: Remove the existing room thermostat fol-
lowing the procedure described it its installation manual, the 2 core cable has
to be unplugged from the TA1 connector on the boiler (Paragraph 5.1).
CAUTION!
The installation must be performed by quali fi ed personnel. Before its assembly,
switch o ff the power supply of the boiler. The Bus cable is polarized: to avoid
any communication issue respect the polarity between all the products in the
heating system.
5.1 Possible installation architectures
With the intent to give several examples to lead the installation of Cha ff olink, in the
following paragraph are reported some major system diagrams that could be reali-
zed through Cha ff olink and other accessories already in the Cha ff oteaux products
range. With each example, is also speci fi ed which services can be activated.
The term “Remote Diagnostics” (RD) refers to the utility dedicated to Service Cen-
ters, through which all the assistance features of Cha ff olink are enabled.
“Remote Control” (RC) refers instead to the service oriented to the end user, throu-
gh which he can use the Cha ff olink smartphone app or web portale to monitor and
set its Cha ff oteaux products.
For further info and details on the installation diagrams shown below, please con-
tact the Cha ff oteaux Technical Center of your Country.
5. CHAFFOLINK INSTALLATION