June 5, 2012
Chadwick Engineering Ltd.
TITAN Trainer Equine Treadmill
Model 1677-2
Publication No 1760-260-R1
Chadwick Engineering Ltd. -
TITAN Trainer
Model 1677-2
Installation – Operation – Maintenance
Page 12 of
33
Belt Lube Setup Screen
The lubrication cycle will occur automatically during treadmill operation at the beginning of a manual or
automatic program. The cycle is initiated based on the Belt Lube Days setting or the Belt Lube Miles
setting, which ever comes first. On completion of a lube cycle, the accumulated miles and days since the
last lube will be reset to 0. Below depicts the message that appears during a lube cycle.
Belt Lube Setup Screen
3.5
Incline Setup
Once the treadmill is positioned and on the level the incline should be zeroed. To zero the incline,
ensure the control power is on, see section 3.2 for control power application, from the ‘MAIN’ screen press
the “SYSTEM MAINTENANCE’ in the lower left hand corner of the screen. A numeric pop up window will
appear requesting a security code to access the maintenance functions. Enter the access code and press
‘ENTER’. From the System Maintenance Screen select the Incline Setup screen. Below depicts the
INCLINE SETUP screen.
