June 5, 2012
Chadwick Engineering Ltd.
TITAN Trainer Equine Treadmill
Model 1677-2
Publication No 1760-260-R1
Chadwick Engineering Ltd. -
TITAN Trainer
Model 1677-2
Installation – Operation – Maintenance
Page 11 of
33
Main Screen
The automatic belt lubrication cycle settings can be adjusted from the Belt Lube Setup screen. The
belt lube setup screen can be accessed from the “maintenance screen. The following adjustments can be
made:
BELT LUBE DAYS SETPOINT:
The belt lube days set-point is the number of days in between lube cycles. This setting is
adjustable from 1 to 14 days.
BELT LUBE MILES SETPOINT:
The belt lube miles set-point is the number of miles in between lube cycles. This setting is
adjustable from 10 to 99 miles.
LUBE DURATION(SECONDS):
The lube duration is the number of seconds the lubrication fluid is applied. This setting is
adjustable from 10 to 30 seconds.
The default lubrication cycle is a lubrication application for 10 seconds every 7 days or 59 miles which
ever comes first. Under some conditions more belt lubrication may be required. Belt drive motor current
levels will indicate more lubrication required.
The
TITAN Trainer Equine Treadmill
uses a belt lubricant that is specifically
developed for treadmills. The treadmill warranty requires that only this lubricant
be used. The treadmill is delivered with two gallons of lubricant in the reservoir.
Lubricant can be ordered from Chadwick Engineering Ltd.
