1
Wall-Mounted Remote Control Wiring
WARNING
•
The wiring should adapt to the wire control current.
Otherwise, electric leakage or overheating may occur
and result in fire.
•
The specified cables
must
be used in the wiring. No
external force
should
be applied to the terminal.
Otherwise, the wire may be damaged and heating may
occur and result in fire.
CAUTION
•
The shielded wire must be grounded.
•
The connecting cable shouldn
'
t be longer than 20
m (65.5
ft
).
•
The remote control operates on
a
low
-
voltage circuit
loop.
DO NOT
connect a 220V or 380V cable to
it
.
•
Make sure th
e
configured tubes are 30-50
cm (12-20
ft
)
or more apart.
•
DO NOT
employ an ohmmeter to detect the insulation
after wiring the remote control.
