43/55
E
Product:
SAM-1000_DPS
Revision 2.0 – Issue June 2022
9 Maintenance & repair
9.1 Replacing the solenoid valves / replacing the filter
•
To replace the solenoid valve, unscrew it using a hook spanner (Item No.: 1017105)
•
O-ring (Item No.: 1026311) and the filter (Item No.: 1026309 (50µ)) are located on the bottom of the
connection
•
To change the filter frits, loosen the Allen screws and remove the connection
•
Remove the O-ring and take out the filter
•
Before inserting the new filter and O-ring, clean the contact surfaces of the O-ring so that it can properly
seal.
Maintenance or repair must only be performed by CGS service technicians. This can also be done by CGS-in-
structed / trained technicians.
The warranty and liability expires in case of unauthorised maintenance or repair work.
The applicable safety and accident prevention regulations must be observed in any case.
Summary of Contents for SAM-1000 DPS
Page 2: ......
Page 42: ...42 55 E Product SAM 1000_DPS Revision 2 0 Issue June 2022 8 Application example...
Page 54: ......
Page 55: ......
