CGS SAM-1000 DPS, Operating Instructions Manual

Page: 34 / 55

34/55
E
Product:
SAM-1000_DPS Revision 2.0 – Issue June 2022
7.4 Activation of the profibus master
The commands for valve control from the master are only in the „PLS“ operating mode of the SAM-1000_DPS
accepted. To e.g. open the SG1.1 for measuring point 1, A1.0 must be set to „1“.
To close the corresponding output must be set to „0“. All valves are controlled in this way.
Module Offset Data type Assignment Visualisation
7.4: BYTE E15.0 BOOL Signal from virtual Input DI57
E15.1 BOOL Signal from virtual Input DI58
E15.2 BOOL Signal from virtual Input DI59
E15.3 BOOL Signal from virtual Input DI60
E15.4 BOOL Signal from virtual Input DI61
E15.5 BOOL Signal from virtual Input DI62
E15.6 BOOL Signal from virtual Input DI63
E15.7 BOOL Signal from virtual Input DI64
8 8.1: WORD EW16 WORD Sample gas pressure 0-4bavr AI9
8.2: WORD EW18 WORD A10
8.3: WORD EW20 WORD Bypass 1 - 0-60l/h AI1
8.4: WORD EW22 WORD Bypass 2 - 0-60l/h AI2
8.5: WORD EW24 WORD Bypass 3 - 0-60l/h AI3
8.6: WORD EW26 WORD Bypass 4 - 0-60l/h AI4
8.7: WORD EW28 WORD Bypass 5 - 0-60l/h AI5
8.8: WORD EW30 WORD Bypass 6 - 0-60l/h AI6
8.9: WORD EW32 WORD Quick purge 0-300l/h AI7
8.10: WORD EW34 WORD Bypass Pressure regulator 0-300l/h AI8
8.11: WORD EW36 WORD Signal from analog input 11 A11
8.12: WORD EW38 WORD Signal from analog input 12 A12
8.13: WORD EW40 WORD Signal from analog input 13 A13
8.14: WORD EW42 WORD Signal from analog input 14 A14
8.15: WORD EW44 WORD Signal from analog input 15 A15
8.16: WORD EW46 WORD Signal from analog input 16 A16
8.17: WORD EW48 WORD Signal from analog input 17 A17
8.18: WORD EW50 WORD Signal from analog input 18 A18